Marble Slabs, Ceramics, Granite Slabs for Flooring

ct1.jpg

Many homeowners are inspired by the classic, vein beauty of marble slabs, such that it is used as an interior finishing, as well as apart component in bathrooms.

Marble Slabs Atascadero are easily identified by the veins (combined mixture of clay, silt, sand, iron oxide, and chert that have been pressed together to produce a movement), that are inherent in the stone, in which they come in varying colors, such that, no two stones are perfectly alike; therefore, when you desire to use marble slabs for your bathroom floor, consider the type of vein you prefer, so there is a harmony of this once they are installed on the floor.

If marble is selected for bathroom floors, it must be compatible for wet conditions, therefore, choose marble with a honed or low-gloss finish for best results, since honed marble doesn’t have the reflective properties of polished marble, and it is typically sealed to minimize damage which is caused by moisture.

Stone-cutting techniques in marbles must be considered in bathroom tiling, since they produce a variety of finishes that maximize the decorative appeal of marbles, like vein-cut marble is cut to enhance the appearance of movement and produce a consistent veining pattern within a marble slab or tiles.

Glazed ceramic flooring tiles is made up of a protective layer that rests over the material, thereby, making ceramic tiles impervious to water and stain penetration, as well as naturally resistant to high humidity conditions, such that they are ideal for use in wet environments such as bathrooms or kitchens.

To protect the surface from liquids and make them impervious to water, so as not to weaken the installation and cause mold growth, unglazed ceramic tiles must first be sealed.

Ceramic Tiling Atascadero is extremely tough, which means that tiles are difficult to crack, such that installation can last for 10-20 years and longer if they are well-maintained, and if a tile has a crack from a severe impact, the process of replacing the tile is relatively simple.

The mineral components (feldspar, quartz and mica) in granite give a grainy composition and coarse natural texture, and its interlocking crystal structure makes granite an incredible strong, durable, and heat resistant natural material.

There are varieties of granite tile surface finish, in which the most popular are the polished, honed, and flamed types. The flamed tiles are for external flooring, decks, pavements, sidewalks, curb stones, and the honed tiles are for indoor/outdoor flooring, as well as wash-rooms and sidewalks, while the polished tiles are used for indoor flooring.

Granite tile floors look best when they are butted, that’s why it is important that the tiles are matched before setting. To protect the granite from water patches and stains, the surface has to be sealed with a water-based sealant.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s